How to Eliminate Washing Machine Odors with This $2 Cleaning Hack
There’s nothing quite like the fresh scent of clean laundry. However, that pleasant aroma can quickly disappear if you’re faced with a smelly washing machine. If you’re tired of unpleasant odors wafting from your washing machine, it might be time to give the appliance a good cleaning. The good news is you don’t need expensive cleaning products to do this. This simple and inexpensive $2 cleaning hack using bicarbonate of soda can get your washing machine smelling fresh and clean again.
Why Does Your Washing Machine Smell?
Before diving into the cleaning solution, it’s essential to understand why washing machines develop unpleasant odors in the first place. The combination of dirt, detergent residue, mildew, and mould can create a breeding ground for bacteria that cause foul smells. Areas most likely to suffer include:
- The rubber seal
- Detergent drawer
- The drum
- Drain filters
The Main Culprit: The Rubber Seal
The rubber seal, or the door gasket, is a primary location where mold and mildew build-up. This seal is designed to keep water from leaking out during a wash cycle, but it often traps moisture and debris, providing the perfect environment for mold growth.
The Magic of Bicarbonate of Soda
Bicarbonate of soda, also known as baking soda, is a versatile household cleaning staple. Not only is it effective in neutralizing odors, but it also helps to scrub away grime and mildew. Its natural deodorizing properties make it an ideal candidate for tackling washing machine smells.
Why Bicarbonate of Soda Works
- It is a mild abrasive, providing gentle scrubbing power.
- It neutralizes acidic and basic odors, creating a balanced pH environment.
- It is non-toxic and safe for your washing machine.
- It is affordable and widely available.
Step-by-Step Guide to Cleaning Your Washing Machine
Step 1: Gather Your Supplies
You will need the following items to clean your washing machine:
- Soft cloth or sponge
- Old toothbrush
- 1/4 cup of bicarbonate of soda
- White vinegar
- Microfiber cloth
- Old towel (optional)
Step 2: Clean the Rubber Seal
Begin by thoroughly cleaning the rubber seal. Follow these steps:
- Mix a paste of bicarbonate of soda and a small amount of water.
- Use the old toothbrush to apply the paste to the rubber seal, ensuring you get into all the nooks and crannies.
- Let the paste sit for about 10-15 minutes to break down the grime.
- Gently scrub the seal with the old toothbrush to remove any mildew or residue.
- Wipe away the paste with a damp cloth.
Step 3: Clean the Detergent Drawer
Detergent drawers can also harbor residue and mold. Here’s how to clean them effectively:
- Remove the detergent drawer from the washing machine.
- Soak the drawer in a bowl of warm water and a few teaspoons of bicarbonate of soda.
- Use the old toothbrush to scrub any stubborn residue.
- Rinse the drawer thoroughly and dry it with a microfiber cloth.
- Replace the drawer back into the washing machine.
Step 4: Clean the Drum
Follow these steps to tackle the drum:
- Sprinkle 1/4 cup of bicarbonate of soda directly into the drum.
- Pour 2 cups of white vinegar into the washing machine drum.
- Run a hot cycle without any clothes to allow the bicarbonate of soda and vinegar mixture to remove odors and residues.
- For an extra cleaning boost, you can add a few drops of essential oil for a pleasant fragrance.
Step 5: Final Touches
Once the cleaning cycle is complete, perform these last steps:
- Use a microfiber cloth to wipe down the inside of the drum and rubber seal to remove any remaining moisture.
- Leave the washing machine door open for a few hours to allow it to air dry completely and prevent future mold growth.
- If your machine has a drainage filter, don’t forget to clean it as well by removing any trapped debris.
Prevention Tips to Keep Your Washing Machine Smelling Fresh
Once you’ve gone through the effort of deep cleaning your washing machine, you’ll want to keep it smelling fresh for as long as possible. Here are some preventative tips:
- Leave the Door Open: After each wash, leave the washing machine door open to allow air circulation and prevent moisture build-up.
- Dry the Rubber Seal: After each load, wipe down the rubber seal to remove any leftover moisture.
- Use the Right Detergent: Opt for high-efficiency detergents that produce fewer suds which can contribute to residue build-up.
- Regular Cleaning Cycles: Run a monthly cleaning cycle with bicarbonate of soda and vinegar to maintain freshness.
- Avoid Overloading: Overloading the washing machine can cause detergent and fabric softener to accumulate, leading to odors.
Common Mistakes to Avoid
Even if you’re diligent about cleaning, certain mistakes can set you back. Avoid these common pitfalls:
- Using too much detergent: Excess detergent can lead to build-up and bad smells.
- Skipping the rinse: Make sure you run a rinse cycle to remove any cleaning solution residues.
- Neglecting regular maintenance: Forgetting to clean monthly can result in recurring odors.
- Ignoring small signals: Address minor smells immediately before they turn into major problems.
Conclusion
Eliminating washing machine odors can be quick, effective, and budget-friendly. With a little bicarbonate of soda and some elbow grease, you can have your washing machine smelling fresh and clean. By following these cleaning steps and adopting some preventative measures, you can enjoy the delightful scent of clean laundry all year round. Plus, with this economical $2 hack, you’ll keep your washing machine in great condition without breaking the bank.